Single jet, super-dry dial water meter, with a direct reading across 8 numeric rolls.

Single jet, super-dry dial water meter, with a direct reading across 8 numeric rolls, pre-equipped for optical modules.

The HYDRODIGIT-S1 is a single jet water meter with a digital display across 8 digits and inductive transmission.

The Hydrodigit-M1 is a multi-jet SMART meter, with a digital display and 8 digit 360° rotating dial.

The GMDM-I is a multi-jet, semi-dry type magnetic transmission water meter with a 360° rotating lid.

The WDE-K50 is a horizontal Woltmann with a removable insert and sealed counter mechanism with a magnetic transmission.

The WDE has a sealed counter mechanism with magnetic transmission and has a direct read across 7-numerical rolls.

The WDE-K40 is a horizontal Woltmann with a removable insert and sealed counter mechanism with a magnetic transmission.

BMETERS’ TAN-X5 is a tangential water meter, specifically developed for irrigation purposes.

The electro-magnetic flow meter MAG-C has been engineered for measuring the flow and the volume of any liquid that is electrically conducted.

HYDROCAL-M4 is a compact thermal energy meter. It measures the amount of energy used for heating or cooling the water supplied to individual tenants served by centralised heating/cooling systems.

HYDROSPLIT M3 is a separate (split) thermal energy calculator easily connectable to external
flowmeters equipped with pulse output.

HYDROCAL-M3 is a compact thermal energy meter that measures the amount of energy used for heating or cooling the water supplied to individual tenants.

Flow sensor based on the ultrasonic measurement technology. The absence of internal moving parts ensures maximum measurement accuracy, no maintenance requirement and constant functionality over time.

Multi jet meter, dry dial, magnetic transmission.

Horizontal Woltmann with removable insert. Sealed counter mechanism with magnetic transmission. Direct reading on numerical rolls. Equipped with pulse emitter device.

RFM-AMB is a temperature and humidity sensor that collects the data recorded in the rooms where it is installed transmitting them via Wireless M-BUS.

Heat cost allocator with 2 temperature sensors, recording of the ambient temperature, possibility
of transmitting the collected data by radio using the protocol Wireless M-BUS EN13757-4 (OMS).

No-return valve for single jet water meters

No-return valve for multi jet water meters

Made from MOPLEN Polypropylene, BMETERS SAF Anti-tampering seals are resistant to chemicals, Acids, Salts, Organic Solvents, Alkalis, Weather and Ultraviolet radiations.

Tailpiece with built-in non return valve, available for single jet water meters

Set of RAC Connectors for water meter installation

Hydrosonic ultrasonic smart meter designed for measuring cold water consumption in households, blocks of flats and for industrial applications.

PT1000 temperature probes MI004 MID certified.

Stainless Steel Temperature Sensor Pockets are sockets for temperature probes.

Ball Valve with no socket pre-equipped for the connection of the Hydrocal-M3 temperature probes.

230 V – 50Hz power supply for HYDROSPLIT-M3.

The UC Cable provides an optical/USB probe for the configuration and reading of thermal energy meters HYDROCAL-M3 and HYDROSPLIT-M3.

Two-component adhesive for the installation of the heat cost allocator HYDROCLIMA on structural elements.

Socket wrench for the installation of the heat cost allocator HYDROCLIMA with welded stud.

The BMETERS OPTO-USB is an optical head for programming and reading of heat cost allocators; HYDROCLIMA-RFM and HYDROCLIMA-OPTO.

IWM-LR3 has been designed to allow wireless remote reading in different types of applications from the residential sector to the commercial and industrial sectors.

LoRaWAN Radio module for pre-equipped Woltmann water meters.

RFM-LR1 has been designed to allow wireless remote reading in different types of applications in the residential sector.

LoRaWAN Module for pulse output meters.

WRM-TS is a wireless m-bus receiver, intended to collect data from various devices, working in modes T or S according to wireless m-bus standard (EN13757-4).

Pulse outputs are common on meters that detect flow

M-BUS is a European standard for the remote meter consumption reading

A Wireless M-BUS reading systems allows for the remote collection of the data recorded by the meter, eliminating any manual operation

LoRa is a LPWAN (Low Power Wide Area Network) radio technology that enables long range transmission

The H7CX series offers multiple timing ranges for precise timing control, as well as real twin-timing and memory function.

The H7-BM1 pulse counter allows the reading of the pulse signals generated by up to four water meters. It is possible to set the pulse value for each input signal independently.

The IWM-PL4 is suitable for remote reading applications in commercial and industrial sectors, acting as an electronic pulse-emitter.

Electronic pulse emitter module for multi jet meters with inductive interface.

The MB-RPT-250 is a microcontroller-based, bidirectional, M-BUS to M-BUS repeater. It can supply power to maximum 250 m-bus slave devices.

MB-CR-64 is microcontroller-based bidirectional M-BUS Master converting M-Bus signal to Modbus RS-485 RTU and or Modbus TCP.

MB-LV32 is micro-controller-based bi-directional full-duplex M-bus to RS-232C converter. It can supply power to maximum of 32 m-bus slave devices.

MB MASTER concentrator allows communication with all data transmission modules that adopt the MBUS EN13757-3 standard.

The MB-PULSE 4 module allows to convert the classic impulse signal (REED or OC) to the Wired MBUS standard (EN13757-3).

The IWM-MB4 is a wired M-BUS module for Woltmann meters, suitable for remote reading applications in a commercial and industrial context.

The IWM-MB3 is a wired M-BUS module for multi-jet water meters with inductive interface.

The RFM-MB1 is a wired M-BUS module suitable for the consumption data transmission and applicable to the single jet GSD8-RFM.

The signal repeater Wireless M-Bus-RFM RPT3, is a device that allows to repeat, extending its coverage, the radio signal transmitted by the radio modules.

The RFM-C3 is a gateway/data concentrator that collects data sent from Wireless M-Bus devices and transmits them via GPRS signal or via Ethernet / LAN / Wi-Fi network.

The RFM-RBT Wireless M-BUS receiver is a device capable of collecting the reading data transmitted by the radio modules installed on water meters, heat meters, and heat cost allocators.

The RFM-RX2 Wireless M-BUS receiver is an USB device used to configure and collect the reading data transmitted by the radio modules.

The RFM-TXE module transmits via radio the lecture data of 1 or 2 meters equipped with pulse output device.

Wireless M-BUS OMS module for Woltmann meters with inductive interface.

IWM-TX3 has been designed to allow wireless remote reading in different types of applications from the residential sector to the commercial and industrial sectors.

The RFM-TX1 is a radio module suitable for the water consumption data radio transmission applicable to the single jet GSD8-RFM water meters.