Wireless M-BUS OMS module for Woltmann meters with inductive interface
IWM-TX4 has been designed to allow wireless remote reading in different types of applications in commercial and industrial sectors. The radio module thanks to the presence of the inductive target into the meter dial allows the reading of the volume consumption without any constraints of access to the site in walk-by mode or AMR (automatic meter reading), in respect of the WMBUS standard and complying with the OMS (Open metering system) specification.
Consumption analysis with reverse flow compensation that provides an always perfect alignment between the counter and the counter clock.
Fraud control (removal of the radio module, application of external magnetic field, reverse flow, identification of system loss). Magnetic tampering at the counter and removal are recorded and reported to the receiving system via radio transmission. The presence of reverse flow is recorded in an additional register that allows to calculate the amount of water passed in reverse. The loss function can be monitored at the time of reading or by the AMR system if a timely update is desired.
IP68 protection* allows the use of the module also for meters installed in difficult environments.
NFC interface allows configuration and commissioning of the device with the use of a simple smartphone app.
|Radio interface||W-Mbus EN13757-4 @868 MHz ≤ 25 mW, mode T1|
|Compatible water meters||WDE-K50|
|Pulse output minimum value (K)||10 liters (up to DN125) or 100 liters (from DN150)|
|Configuration||Via radio (with RFM-RX2 and software B Metering), NFC (with Android app)|
|Energy supply||Non-replaceable lithium battery, maximum lifetime 10 years**|
|Size (l x p x h)||100 x 100 x 57 mm|
|Working temperature||+1° / +55°C|
|Transmitted data||Volume (consumption), total of backward flow, 12 monthly historical values, battery status, alarms.|
|Alarms||Discharged battery, module removal, magnetic fraud attempt, backward flow, leakage detection|
|Module programming requirements||Android device (smartphone, tablet, etc.) with an NFC interface and the NFC IWM Config APP freely downloadable from GOOGLE PLAY|
* In optimal signal transmission conditions
** The battery life strongly depends on the working time window, set during the configuration process, and on the environmental conditions
*** IP68: maximum 24 hours of continuous submersion at 1 m depth
IWM-LR3 has been designed to allow wireless remote reading in different types of applications from the residential sector to the …
RFM-LR1 has been designed to allow wireless remote reading in different types of applications in the residential sector.
WRM-TS is a wireless m-bus receiver, intended to collect data from various devices, working in modes T or S according …
The signal repeater Wireless M-Bus-RFM RPT3, is a device that allows to repeat, extending its coverage, the radio signal transmitted …
The RFM-C3 is a gateway/data concentrator that collects data sent from Wireless M-Bus devices and transmits them via GPRS signal …
Metering products and reading system modules are ready to ship
Order before 5pm for guaranteed next day delivery on stocked products
Free lifetime technical support on all products and systems by B METERS
We've been manufacturing precise measurement instruments for over 25 years