MMCR-64 is a microprocessor two-way full-duplex M-bus to Modbus converter, with ability to supply 64 or 128 M-bus slave devices.

MBnano-10 is a microprocessor two-way full-duplex M-bus to USB converter. MBnano is powered from USB port of a PC/laptop and can supply maximum of 10 M-bus slave devices.

MBRS-10DC is a microprocessor two-way full-duplex M-bus to RS-232С converter, with ability to supply maximum of 10 M-bus slave devices.

MBRS-10 is a microprocessor two-way full-duplex M-bus to RS-232С converter, with ability to supply maximum of 10 M-bus slave devices.

MBRS-64 is a microprocessor two-way full-duplex M-bus to RS-232С converter, with ability to supply maximum of 64 M-bus slave devices.

MBRS-250 is a microprocessor two-way full-duplex M-bus to RS-232С converter, with ability to supply maximum of 250 M-bus slave devices.

MBRS-32 is a microprocessor two-way full-duplex M-bus to RS-232С converter, with ability to supply maximum of 32 M-bus slave devices.

MBRS-128 is a microprocessor two-way full-duplex M-bus to RS-232С converter, with ability to supply maximum of 128 M-bus slave devices.

MBU-250 is a full-duplex M-bus converter with several interfaces. It can supply up to 250 m-bus slave devices and has RS-232, RS-485 and USB interfaces.

Wireless M-Bus pulse counters are intended to count pulses from different devices, in most of the cases, water meters. Pulse inputs are designed for so-called ‘dry’ contacts (reed switches) or open collector output.

Wireless m-bus repeaters are intended to re-transmit data from wireless m-bus meters or sensors. This is often needed inside big buildings, where meters are with wireless m-bus.

Wireless M-Bus repeaters are intended to retransmit data from wireless M-Bus meters or sensors. This is often needed inside big buildings, where meters are with wireless M-Bus.

Wireless M-Bus repeaters are intended to retransmit data from wireless M-Bus meters or sensors. This is often needed inside or outside big buildings, where meters are with wireless M-Bus.

WRMnano is an wireless m-bus receiver, intended to collect data from various devices, working in modes T, S or C, according to wireless m-bus standard (EN13757-4).

WMR-IoT is an USB-based wireless m-bus receiver/repeater, intended to collect data from various devices, working in modes T, S or C according to wireless m-bus standard (EN13757-4).

WRM-TS is a wireless m-bus receiver, intended to collect data from various devices, working in modes T, S or C, according to wireless m-bus standard (EN13757-4).

MBRP-250 is a microprocessor two-way full-duplex M-bus to M-bus converter, with the ability to expand existing networks with up to 250 additional slave devices.

MBRP-64 is a microprocessor two-way full-duplex M-bus to M-bus converter, with the ability to expand existing networks with up to 64 additional slave devices.

PCM-8D are microcontroller pulse counters with a Modbus interface. Their purpose is to be wired to pulse devices to read remotely their values or to make a Modbus network to read all meters in a building (usually water, heat and energy meters with pulse output).

MPPS-2 is a simplified microcontroller manometer with an M-Bus interface. It is intended to measure pressure from 4-20 mA transducers, with a maximum of 16 bars.

MBPT-2 is a simplified microcontroller thermometer with an M-Bus interface. It is intended to measure temperature with Pt1000 sensors, with or without compensation.

MBHL-2/4 are simplified microcontroller pulse counters with m-bus interface. Their purpose is to connect in m-bus network devices, which do not have m-bus (usually water- and heat- meters with pulse output).

MBHS-2/4/6/8 are simplified microcontroller pulse counters with m-bus interface.

MBSS-2/4/6/8 are microcontroller pulse counters with an M-Bus interface.

EI-122 main purpose is to measure temperature and transfer data thourgh internet/LAN. Device has two channels for connecting Pt1000 sensors, with or without compensation. Main interface is 10/100 TCP, which can act as a server or client. In addition, 4 pulse inputs are provided.

MBD-X250 is a standalone device, which is used to read all M-Bus/Modbus devices in a network. MBD-X250 is equipped with a large LCD display, showing information for every device, and has big non-volatile memory.

MBLM-2 is a microcontroller V32.bis full-duplex phone modem, suited for remote transmission of M-Bus or other networks for remote reading.

MBET-3 is an internet/LAN data transceiver for use in remote reading systems, mostly Modbus RTU and M-Bus.

MBET-2WR is an internet/LAN data transceiver for use in remote reading systems, mostly M-Bus. It has three standard pulse inputs, one RS-232C interface for connection to the network master converter or for initial programming and an Ethernet interface.

MBET-2 is an internet/LAN data transceiver for use in remote reading systems, mostly M-Bus. It has one RS-232C interface for connection to the network master converter (like MBRS-xx) and for initial programming and an Ethernet interface.

MBGP-3EP is a GSM/GPRS converter capable of working with 4G networks.

ELM-07S is specially designed to allow easy accomodation of electricity meters to global remote reading system. IEC 62056-21 (former 61107) is serial protocol for transmitting data, designed specially for electricity meters.

MBM-TFT is intended to supply and read up to 250 m-bus slave devices. Can be ordered in 3 versions – for 64, 128 or 250 slave meters. It can store and display additional data for each slave such as second main value, additional pulse inputs (for heat meters), two rows of free text, user number, medium measured, etc. It has 5” TFT display with resolutin of 800×480 pixels.

MBM-64/250 is intended to supply and read up to 250 M-Bus slave devices. It can store and display additional data for each slave, such as free text, user number, medium measured.

MBM-10/40 is intended to supply and read up to 40 M-Bus slave devices. It can store and display additional data for each slave, such as free text, user number, medium measured, etc.